Shandong Ecolink Technology Co., Ltd. is one of the most reliable manufacturers and suppliers of liquid polyacrylamide in China, featured by quality products and good service. If you're going to wholesale high quality liquid polyacrylamide, welcome to get more information from our factory.
Product Introduction
In practical water treatment and industrial applications, common problems of traditional powdered polyacrylamide (PAM) include:
- Long dissolution time, affecting production efficiency
- Easy to agglomerate, complex operation
- Poor compatibility with automatic dosing systems
- Improper use leading to performance fluctuations
To solve these problems, we have launched polyacrylamide emulsion (PAM Emulsion), with "rapid dissolution + efficient usage" as the core advantages:
👉 Strong instant solubility → greatly shorten dissolution time
👉 No need for complex dissolution equipment → simpler operation
👉 Suitable for automated dosing → improve production efficiency
👉 Higher effective utilization rate → reduce usage cost
👉 Value to customers:
✔ Improve treatment efficiency
✔ Reduce labor cost
✔ Reduce operational risks
✔ Improve system stability
As an efficient water treatment emulsion flocculant, this product is particularly suitable for scenarios with high requirements for operational convenience and dosing accuracy.
Product Overview
Polyacrylamide emulsion is a high molecular flocculant prepared in a water-in-oil (W/O) or oil-in-water system. Compared with traditional powder products, its molecules are more easily released in the emulsion state.
Product Features:
- High molecular weight polymer with strong flocculation ability
- Emulsion form with fast dissolution speed
- Suitable for continuous automatic dosing systems
Can be provided according to requirements:
- Nonionic emulsion (NPAM Emulsion)
- Anionic emulsion (APAM Emulsion)
- Cationic emulsion (CPAM Emulsion)
This liquid polyacrylamide covers multiple ionic types and can meet the flocculation needs of different industries.
Product Parameter (specification)
|
Item |
Specification |
|
Appearance |
Milky white liquid |
|
Solid Content |
25%–40% |
|
Molecular Weight |
8–20 million (customizable) |
|
Ionic Type |
Anionic / Cationic / Nonionic |
|
Viscosity |
100–1000 cps |
|
Dissolution Time |
≤10 minutes |
|
Recommended Dilution Concentration |
0.1%–0.3% |
|
Applicable pH Range |
4–10 |
|
Stability |
≥6 months |
Typical Application Comparison Table for Each Ionic Type
|
Ionic Type |
Typical Molecular Weight |
Typical Ionic Degree |
Main Application Scenarios |
|
Cationic |
8–10 million |
10–40% |
Sludge dewatering (municipal/industrial), air flotation, papermaking retention aid |
|
Cationic (High Ionic Degree) |
6–8 million |
50–80% |
High-organic sludge, food wastewater, printing and dyeing wastewater |
|
Anionic |
12–18 million |
15–30% |
Industrial wastewater sedimentation, mining tailings, oilfield EOR |
|
Anionic (High Molecular Weight) |
18–22 million |
10–20% |
Fracturing fluid thickening, EOR polymer flooding |
|
Nonionic |
10–15 million |
≤5% |
Coal washing, acidic wastewater, mineral processing |
Note:
Compared with powder products, emulsion PAM products can reduce dissolution time by more than 70%
More suitable for processes requiring rapid response
Product Advantages
The following table presents solutions to the 6 most common problems in emulsion PAM applications and your actual benefits:
1. Dust Pollution and High Environmental Pressure
Powder PAM generates dust during unpacking, which is harmful when inhaled by workers and may result in environmental penalties.
Because our product is in liquid form with a water-in-oil structure, it is completely dust-free, with zero pollution during unpacking and dosing.
Your customers:
① No need for dust removal equipment, saving tens of thousands of costs;
② Workers have no complaints;
③ Easily pass environmental inspections. You help customers reduce trouble, and they will naturally cooperate with you long-term.
2. Slow Dissolution, Especially in Winter
Powder PAM requires 60–90 minutes of stirring in cold water during winter, consuming electricity, labor, and time.
Because emulsion particles are pre-hydrated, they disperse within 10–30 seconds at room temperature and fully dissolve within 2–5 minutes.
Your customers:
① No need for heating equipment;
② Save electricity (stirring time reduced by 90%);
③ Save labor (no need to monitor dissolution). Overall, the cost per ton is lower than powder.
3. No Dissolution Equipment Available
Many small customers (such as small wastewater plants and coal washing plants) do not have dissolution or aging tanks, making powder unusable.
Because the emulsion can be dosed directly or after simple dilution, no dissolution equipment is required-only a dosing pump is needed.
You can now serve customers you previously could not. Your market expands by more than 30%. Where others cannot sell, you can.
4. Inaccurate On-site Solution Concentration
Operators add powder based on experience, causing unstable concentration and performance fluctuations.
Because emulsion viscosity is uniform and active content is constant, dosing by volume or weight ensures precise concentration control.
Your customers:
① Stable performance and improved compliance rate;
② Reduced chemical waste. Your complaint calls decrease significantly.
Powder may absorb moisture and become unusable if not consumed in time after opening.
Because the emulsion is stored in sealed containers, it is isolated from air and moisture, remaining stable for 3 months after opening (under cool storage).
Customers do not need to worry about waste, and you avoid return disputes.
Powder may be classified as "dust hazardous material" in some countries, causing customs clearance difficulties.
Because the emulsion is dust-free and non-flammable, it is classified as non-hazardous for transportation, ensuring smooth customs clearance.
You export more easily, and customers receive goods faster.
As a PAM emulsion designed for automatic dosing systems, this product has excellent compatibility with automated dosing equipment.
Application Range + Recommended Solutions
Recommended:
- Type: Cationic emulsion
- Dosage: 1–5 ppm
👉 Effects:
✔ Rapid flocculation
✔ Improved dewatering efficiency
This cationic emulsion for municipal sludge dewatering performs particularly well in municipal wastewater treatment plants.
Recommended:
- Type: Cationic
- Dosage: 2–6 kg/ton dry sludge
👉 Effects:
✔ Improve sludge cake dryness
✔ Reduce treatment cost
Recommended:
- Type: Anionic or nonionic
- Dosage: 2–6 ppm
👉 Effects:
✔ Improve water clarity
✔ Reduce COD load
As a rapid-settling emulsion flocculant for industrial wastewater, this product performs excellently in treating high suspended solids wastewater.
Recommended:
- Type: Anionic emulsion
- Dosage: 3–10 ppm
👉 Effects:
✔ Rapid sedimentation
✔ Improve water reuse
This anionic emulsion for mining tailings thickening effectively improves sedimentation efficiency in solid-liquid separation.
Response to Buyer Concerns
|
Concern |
Solution |
|
Is it more expensive than powder |
Lower overall cost (labor savings + efficiency improvement) |
|
Is it easy to use |
Instant dissolution design, simple operation |
|
Is it suitable for automation |
Fully suitable |
|
Is it stable |
Strong emulsion stability |
|
Is testing supported |
Samples available |
Product Process and Technical Advantages
- Emulsion polymerization technology → improve molecular activity
- Precise molecular weight control → match different applications
- Stable emulsification system → extend storage period
- Quality control system → ensure batch consistency
👉 Core advantages: high efficiency + ease of use
Frequently Asked Questions (FAQ)
Q: Is the performance of emulsion PAM the same as powder PAM?
A: Yes. Our emulsion has an active content of 40–50%. Based on effective components, the flocculation ability is the same as powder with the same molecular weight. The only difference is the form.
Q: How should the emulsion be stored? Will it separate?
A: Store in a cool (5–35°C), dark, and sealed environment. Stability ≥12 months. No phase separation under normal storage. Slight separation after long storage can be resolved by stirring without affecting performance.
Q: How is the emulsion dosed?
A: Two methods:
① Direct dosing: pump directly with a metering pump;
② Diluted dosing: dilute with 1–5 times water before dosing. No dissolution tank or mixer required.
Q: Will it freeze in winter?
A: Freezing point is about -5°C. It thickens below 0°C but fully recovers after thawing. Insulated storage is recommended in cold regions.
Q: Shelf life?
A: Unopened: 12 months. Opened: recommended to use within 3 months (sealed storage extends life).
Q: Can it be customized?
A: Yes. Customizable parameters include ionic type, ionic degree (5%–80%), molecular weight, solid content (40%–55%), and packaging (25kg / 200kg / 1 ton IBC / tanker).
Q: MOQ?
A: From 200 kg (200 kg drum or 8×25 kg). Samples available for first cooperation.
Q: Lead time?
A: Standard products: 5–7 working days; customized: 10–15 working days.
Q: Sample availability?
A: Yes. Free samples provided; freight paid by customer. COA, MSDS, and dosage recommendations included.
Q: Export requirements?
A: Non-hazardous (UN: none, Class: none). Documents available: MSDS, COA, Certificate of Origin, etc.
Q: What if customers think emulsion is more expensive?
A:
① No dissolution tank investment
② 90% energy saving
③ Labor saving
④ No dust environmental risk
⑤ No caking waste
Our high-quality service
A. Direct supply from the source factoryv As an actual factory with an annual production capacity of 300,000 tons, we offer you highly competitive prices and reliable delivery schedules.
B. Customized research and samples: The R&D team can customize exclusive products with specific molecular weight/concentration based on your source water quality and treatment goals. After confirming the indicators, we can provide samples for you to test first, and only after they are qualified, proceed with large-scale production.
C. Strict quality control and packaging: We have advanced production equipment and strict quality control. We also have a production enterprise equipped with heavy metal detection equipment to ensure that every step from raw materials to finished products complies with international standards such as NSF and ISO. Post-shipment inspection, laboratory testing of products before shipment. At the same time, we provide flexible customized packaging services to meet your local storage and transportation needs.
D. Innovation: Our experienced R&D team continuously develops innovative, customized ingredient solutions to meet the changing market demands.
E. One-stop global logistics: From small trial orders to full ship charter, from negotiation, confirmation, production arrangement, booking, customs declaration to export documents, all are followed up by dedicated personnel to ensure professional and efficient order processing. Support shipping by sea, air, and land to any port worldwide.
F. Full-process technical support: Regarding customers' concerns about "not knowing how to use, incorrect ratios", we provide free comprehensive technical guidance. This includes the best ratio schemes for different water sources, correct dissolution steps, and the addition sequence when using multiple chemicals together. What you purchase is not only the product, but also a customized treatment solution to ensure effectiveness.
CTA
Want to improve treatment efficiency and reduce operational costs?
Contact us to get:
✔ Free sample testing
✔ Optimal usage solutions
✔ Fast quotation
✔ Technical support
Use more efficient products to optimize your treatment system
Hot Tags: liquid polyacrylamide, China liquid polyacrylamide manufacturers, suppliers, factory
