Shandong Ecolink Technology Co., Ltd. is one of the most reliable manufacturers and suppliers of poly aluminium chloride flocculant in China, featured by quality products and good service. If you're going to wholesale high quality poly aluminium chloride flocculant, welcome to get more information from our factory.
Product Introduction
In actual water treatment projects, many customers encounter: large dosage, unstable performance, many after-sales issues, and fluctuations in product quality.
This industrial-grade PAC flocculant (polyaluminum chloride) is optimized precisely to address these pain points.
Compared with traditional aluminum salt products, this PAC water treatment chemical has:
Lower dosage, reducing usage cost
Faster flocculation, improving treatment efficiency
Wider adaptability to water quality, reducing debugging difficulty
At the same time, compared with ordinary products, this polyaluminum chloride flocculant has more stable batches, making it more suitable for long-term supply and channel distribution.
👉 An industrial-grade PAC flocculant product that saves cost, is more stable, and makes it easier for customers to repurchase.
Product Overview
Product Name: Industrial-grade PAC flocculant (polyaluminum chloride)
Common names: PAC, polyaluminum, Polyaluminium Chloride, PAC coagulant, PAC sedimentation agent
This product is prepared through polymerization reaction of aluminum salt raw materials. It is a polymer-structured PAC polyaluminum chloride flocculant, widely used in various water treatment systems.
This industrial-grade PAC water treatment flocculant product is suitable for export orders and bulk procurement requirements.
Product Parameter (specification)
|
Item |
Specification |
|
Product Name |
Polyaluminum Chloride |
|
Appearance |
Golden yellow powder |
|
Al₂O₃ Content |
≥ 28% |
|
Basicity |
65–85% |
|
pH (1% aqueous solution) |
3.5–5.0 |
|
Water Insoluble Matter |
≤ 0.3% |
|
Arsenic (As) |
≤ 0.0005% |
|
Lead (Pb) |
≤ 0.002% |
|
Cadmium (Cd) |
≤ 0.0005% |
|
Mercury (Hg) |
≤ 0.00005% |
|
Iron (Fe) |
≤ 1.5% |
|
Chromium (Cr) |
≤ 0.005% |
|
Packaging |
25kg/bag, jumbo bag, customizable |
|
Shelf Life |
24 months (dry and cool place) |
Product Advantages
â‘ Predictable sedimentation speed
Because flocculation speed is tested for each batch, when you design the dosing system, there is no need to reserve 50% redundancy.
→ Pipes, pumps, and mixers can be selected in smaller specifications, reducing upfront investment.
â‘¡ Denser sludge, no filter pressing issues
Because the molecular weight distribution is concentrated, flocs are dense and do not stick to filter cloth.
→ Filter press cake discharges faster, saving both labor and electricity costs.
â‘¢ Works even in low-temperature water
Because basicity is controlled in the lower range of 60–75%, dissolution speed does not decline even when water temperature is 5–8°C in winter.
→ Northern customers do not need additional heating equipment, reducing one potential failure point.
â‘£ Not limited by packaging methods
25kg inner plastic outer woven bags, jumbo bags, and bulk tanker trucks are all acceptable.
→ We adapt to what is convenient for your warehouse, without forcing packaging specifications.
Application Scenarios / Sales Direction
This industrial-grade PAC flocculant (polyaluminum chloride) is suitable for:
1.Municipal sewage treatment
👉 Stable basic demand, suitable for continuous supply
2.Industrial wastewater treatment
👉 Including industries such as printing and dyeing, papermaking, electroplating
3.Circulating water and cooling water systems
👉 Conventional water treatment application scenarios
4.Primary water purification treatment
👉 Can be sold as a basic PAC water treatment chemical product
👉 As a mature polyaluminum chloride flocculant solution product, it is suitable for building a standard product portfolio.
Procurement Concerns
|
Customer Concern |
What We Provide |
|
Product consistency |
Stable production and testing system |
|
Minimum order quantity |
Flexible support |
|
Cost control |
Source factory supply |
|
Documentation |
Provide test reports |
|
Delivery cycle |
Stable delivery time |
|
Packaging form |
Customization supported |
Product Process / Technical Strength
Three details that are easily overlooked but critical:
Detail 1: Cooling method
Others use natural cooling, we use spiral plate heat exchanger for forced cooling.
→ Material stays shorter time in high-temperature zone, less aluminum hydrolysis, higher retention of active components.
Detail 2: Sieve mesh size
Others use 20 mesh, we use 40 mesh + 60 mesh two-stage screening.
→ More fine powder, dissolves without residue.
Detail 3: Aging before packaging
After drying, it is not packaged immediately, but left in stainless steel silo for 12 hours.
→ Residual heat dissipates, static electricity is eliminated, no moisture absorption after sealing.
FAQ
Q: What is the difference between PAC flocculant and PAM?
A: PAC is responsible for "charge neutralization," bringing particles together; PAM is responsible for "bridging," pulling small flocs into larger aggregates.
Most wastewater only needs PAC; adding PAM is an enhancement, not a necessity.
Q: Can it share a dosing system with other chemicals?
A: Yes. PAC 28% solution pH is 3.5–4.5 and does not corrode stainless steel. However, do not store it in the same tank with anionic PAM.
Q: What systems is PAC flocculant suitable for?
A: Suitable for municipal and industrial water treatment systems.
Q: Does it support different specifications?
A: Supports customization of content and packaging.
Q: Storage requirements?
A: Store in a dry and sealed environment.
Q: Can samples be provided for testing?
A: Sample testing is supported.
Q: How to use?
A: It is recommended to dissolve before dosing.
Our high-quality service
A. Direct supply from source factory: As an actual factory with an annual production capacity of 300,000 tons, we provide highly competitive prices and reliable delivery schedules.
B. Customized R&D and samples: The R&D team can customize exclusive products with specific molecular weight/content based on your source water quality and treatment goals. After confirming the indicators, we can provide samples for testing first, and only proceed with large-scale production after qualification.
C. Strict quality control and packaging: We have advanced production equipment and strict quality control, along with heavy metal testing equipment, ensuring every stage from raw materials to finished products complies with international standards such as NSF and ISO. Shipment inspection and laboratory testing are conducted before delivery. At the same time, we provide flexible customized packaging services to meet your local storage and transportation needs.
D. Innovation: Our experienced R&D team continuously develops innovative, customized formulation solutions to meet changing market demands.
E. One-stop global logistics: From small trial orders to full vessel charter, from negotiation, confirmation, production arrangement, booking, customs declaration to export documents, dedicated personnel follow up throughout the process to ensure professional and efficient order handling. Supports sea, air, and land transportation to any port worldwide.
F. Full-process technical support: For concerns such as "not knowing how to use" or "incorrect ratios," we provide free comprehensive technical guidance, including optimal ratio schemes for different water sources, correct dissolution steps, and dosing sequence when using multiple chemicals. What you purchase is not only a product, but also a customized treatment solution ensuring effectiveness.
CTA
If you are looking for:
Stable supply of industrial-grade PAC flocculant products
High cost-performance polyaluminum chloride water treatment chemicals
Easy-to-promote PAC flocculant solutions
Please contact us immediately to obtain quotations and sample support.
Hot Tags: poly aluminium chloride flocculant, China poly aluminium chloride flocculant manufacturers, suppliers, factory
