Shandong Ecolink Technology Co., Ltd. is one of the most reliable manufacturers and suppliers of non ionic polyacrylamide in China, featured by quality products and good service. If you're going to wholesale high quality non ionic polyacrylamide, welcome to get more information from our factory.
Product Introduction
In high-requirement water treatment projects (such as environmental acceptance projects and continuous production systems), the common problems of nonionic polyacrylamide are more obvious:
Performance degradation during long-term operation
Impurities or residues affect system stability
Inability to accurately match products under different working conditions
The core design concept of our NPAM is: "controllability + stability + customization capability"
Advantage 1
Precise molecular weight control system
Ensure highly consistent performance among different batches
Advantage 2
High conversion rate and low residue
Reduce system interference
Advantage 3
Multiple specification customization capability
Provide matching products according to different working conditions
Project Value
β Improve system stability
β Reduce operational risks
β Meet high-standard acceptance requirements
As a high-quality neutral water treatment polymer, this product is especially suitable for projects with strict requirements on stability and residue control.
Product Overview
This nonionic polyacrylamide (NPAM) is produced using a refined polymerization control process, focusing on optimizing the uniformity and stability of the molecular chain structure, so that the product can maintain stable performance under complex working conditions and in continuous operation systems.
The product design concept is not simply to increase molecular weight, but to improve operational stability and reduce the risk of system fluctuations through controllable molecular structure.
Product Features:
- Uniform molecular chain structure, reducing performance fluctuations
- Low hydrolysis degree design, suitable for complex water quality systems
- Low residual monomer control, improving system safety
π More suitable for:
- Continuous operation systems
- High-standard environmental protection projects
- Process flows with high stability requirements
This nonionic PAM can maintain long-term stable flocculation performance in continuous operation systems.
Product Parameter (specification)
|
Item |
Parameter |
|
Appearance |
White powder |
|
Molecular Weight Range |
6–16 million (customizable) |
|
Hydrolysis Degree |
≤3% |
|
Solid Content |
≥89% |
|
Residual Monomer |
≤0.03% |
|
Dissolution Time |
40–60 minutes |
|
Recommended Concentration |
0.05%–0.2% |
|
Applicable pH Range |
4–9 |
Product Advantages
1. Stable Molecular Structure → No Performance Degradation During Long-Term Operation
By optimizing the polymerization path, problems such as molecular chain breakage and unevenness are reduced.
π Results:
β Stable performance during long-term operation
β Avoid frequent adjustment of dosing amount
2. Low Residue Control → Reduce System Risk
By increasing the monomer conversion rate, unreacted monomers are reduced.
π Results:
β Reduce the impact on subsequent treatment systems
β Meet the requirements of environmental protection projects
3. Customizable Molecular Weight System → Accurately Match Working Conditions
Adjust molecular weight according to different water quality and process requirements.
π Results:
β Improve treatment efficiency
β Avoid poor performance caused by "one model for all applications"
4. High Dissolution Stability → Suitable for Automatic Systems
The particle structure is uniform, and the solution remains stable after dissolution.
π Results:
β Not easy to block dosing equipment
β Suitable for automatic dosing systems
Application Range and Recommended Solutions
1. Industrial Circulating Water Systems
Characteristics: Continuous operation and high requirements for stability
Recommended Parameters:
- Molecular weight: 8–12 million
- Dosage: 1–3 ppm
- Solution concentration: 0.05%–0.1%
π Effects:
β Stable operation
β Reduced fluctuations
As a nonionic flocculant for industrial circulating water systems, this product performs particularly stably under continuous operation conditions.
2. Fine Chemical Wastewater
Characteristics: Complex composition and large fluctuations
Recommended Parameters:
- Molecular weight: 6–10 million
- Dosage: 2–5 ppm
π Effects:
β Improve adaptability
β Reduce the frequency of adjustment
This fine chemical wastewater treatment polymer can effectively cope with treatment challenges caused by complex water quality.
3. High-Standard Environmental Protection Projects
Characteristics: Strict requirements on residue and stability
Recommended Solution:
Customized molecular weight
Controlled residual monomer
Used together with PAC
π Effects:
β Meet acceptance standards
β Improve system reliability
As a flocculant for high-standard environmental protection projects, this product can consistently meet standards in environmental acceptance projects.
4. Automatic Dosing Systems
Characteristics: Sensitive equipment and high requirements for solution stability
π Advantages:
β Uniform dissolution
β No equipment blockage
β Stable operation
This NPAM specially designed for automatic dosing systems is particularly suitable for use with automated dosing equipment.
Response Table to Key Concerns
|
Concern |
Our Solution |
|
Long-term stability |
Optimize molecular structure to reduce performance degradation |
|
System safety |
Low residue control |
|
Whether customization is available |
Support customization of molecular weight and performance |
|
Supply stability |
Standardized production system |
|
Technical support |
Provide selection and project support |
Product Process
1. Polymerization Path Control
By adjusting reaction temperature and time, the molecular chain structure becomes more uniform.
π Advantages:
β Improve stability
β Improve performance consistency
2. Precise Molecular Weight Adjustment
Control different molecular weight ranges through reaction parameters.
π Advantages:
β Meet the needs of different working conditions
3. High Conversion Rate Process
Improve monomer reaction efficiency.
π Advantages:
β Reduce residue
β Improve safety
4. Refined Drying Process
Avoid high temperatures damaging the molecular structure.
π Advantages:
β Maintain stable performance
β Improve solubility
Frequently Asked Questions (FAQ)
Q1: Is it suitable for long-term continuous operation systems?
A: Yes. This product focuses on optimizing the stability of the molecular structure and is suitable for long-term operation scenarios.
Q2: Why do some products become less effective after running for a period of time?
A: This is usually caused by unstable molecular structure or batch fluctuations. We avoid this problem through process control.
Q3: Can it be customized according to the project?
A: Yes. We can provide customized solutions according to water quality, process, and equipment conditions.
Q4: Will it affect subsequent treatment systems?
A: No. This product is designed with low residue, which can reduce the impact on subsequent systems.
Q5: Is it suitable for automatic dosing systems?
A: Yes. Both solubility and stability have been optimized, and it is not easy to block equipment.
Q6: How to choose the appropriate molecular weight?
A:High turbidity → High molecular weight
Complex water quality → Medium molecular weight
π It is recommended to determine the optimal solution through laboratory testing.
Q7: Do you support technical services?
A: Yes. We provide support including product selection, testing, and usage optimization suggestions.
Our High-Quality Service
A. Direct supply from the source factory:
As an actual factory with an annual production capacity of 300,000 tons, we offer you highly competitive prices and reliable delivery schedules.
B. Customized research and samples:
The R&D team can customize exclusive products with specific molecular weight/concentration based on your source water quality and treatment goals. After confirming the indicators, we can provide samples for you to test first, and only after they are qualified, proceed with large-scale production.
C. Strict quality control and packaging:
We have advanced production equipment and strict quality control. We also have a production enterprise equipped with heavy metal detection equipment to ensure that every step from raw materials to finished products complies with international standards such as NSF and ISO. Post-shipment inspection and laboratory testing of products are carried out before shipment. At the same time, we provide flexible customized packaging services to meet your local storage and transportation needs.
D. Innovation:
Our experienced R&D team continuously develops innovative, customized ingredient solutions to meet changing market demands.
E. One-stop global logistics:
From small trial orders to full ship charter, from negotiation, confirmation, production arrangement, booking, customs declaration to export documents, all processes are followed up by dedicated personnel to ensure professional and efficient order processing. Support shipping by sea, air, and land to any port worldwide.
F. Full-process technical support:
Regarding customers' concerns about "not knowing how to use" and "incorrect ratios," we provide free comprehensive technical guidance. This includes the best ratio schemes for different water sources, correct dissolution steps, and the addition sequence when using multiple chemicals together. What you purchase is not only the product, but also a customized treatment solution to ensure effectiveness.
CTA
Contact us to obtain a complete technical solution:
β Free product selection suggestions (matching different working conditions)
β Sample testing support
β Customized product solutions
β Stable supply quotation
Help your project operate more stably and reduce long-term risks
Hot Tags: non ionic polyacrylamide, China non ionic polyacrylamide manufacturers, suppliers, factory
